hi guys
I getting some warning on the ESX 4.0 and 4.0 u1
I found this for Emulex but mine are Qlogic
Anyway something I found is the code for my warning is H:0x8 D:0x0 P:0x0
According to the page above H:0x8 means
This status is returned when the HBA driver has aborted the I/O. It can also occur if the HBA does a reset of the target.
what should I do? update something? ESX? Firmware?
Nov 22 17:01:52 shotsxe vmkernel: 150:07:11:00.234 cpu17:4244)<6>qla2xxx 0000:0c:00.0: scsi(3:0:0): Abort command issued -- 1 6550e005 2002.
Nov 22 17:01:52 shotsxe vmkernel: 150:07:11:00.234 cpu17:4113)NMP: nmp_CompleteCommandForPath: Command 0x2a (0x4100020fe300) to NMP device "naa.600a0b
8000504064000005364bb1ba1e" failed on physical path "vmhba1:C0:T0:L0" H:0x8 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.
Nov 22 17:01:52 shotsxe vmkernel: 150:07:11:00.234 cpu17:4113)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe: NMP device "naa.600a0b800050406400000536
4bb1ba1e" state in doubt; requested fast path state update...
Nov 19 17:01:44 shotsxe2 vmkernel: 14:04:11:11.205 cpu10:4277)<6>qla2xxx 0000:0c:00.0: scsi(3:0:3): Abort command issued -- 1 dcbbd8f 2002.
Nov 19 17:01:44 shotsxe2 vmkernel: 14:04:11:11.205 cpu10:4106)NMP: nmp_CompleteCommandForPath: Command 0x2a (0x410002134140) to NMP device "naa.600a0b8
000504064000005394bbaf2e7" failed on physical path "vmhba1:C0:T0:L3" H:0x8 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.
Nov 19 17:01:44 shotsxe2 vmkernel: 14:04:11:11.205 cpu10:4106)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe: NMP device "naa.600a0b8000504064000005394
bbaf2e7" state in doubt; requested fast path state update...
thanks a lot